Mostrar el registro sencillo del ítem
Evaluación del reemplazo de acero tradicional por fibras como refuerzo en losas de concreto
dc.contributor.advisor | Gutiérrez Ruíz, Jose Luis | spa |
dc.contributor.author | Machuca Suarez, Cesar | |
dc.coverage.spatial | Calle 100 | spa |
dc.date.accessioned | 2018-10-17T16:47:17Z | |
dc.date.accessioned | 2019-12-26T21:55:16Z | |
dc.date.available | 2018-10-17T16:47:17Z | |
dc.date.available | 2019-12-26T21:55:16Z | |
dc.date.issued | 2018-05-29 | |
dc.identifier.uri | http://hdl.handle.net/10654/18120 | |
dc.description.abstract | Actualmente, en las obras civiles se practican una serie de técnicas para sometimiento de cargas que han obtenido gran importancia en la economía y el medio empresarial por sus exigentes estándares de calidad. Este es un informe que resulta de la realización del proyecto de grado para optar a título de ingeniero civil, que se desarrolló con el fin de optimizar tiempo y costo en la empresa Gran Tierra Energy de Colombia ubicada en el Valle del Magdalena Medio, en él, se exploró acerca de su funcionamiento, fortalezas y debilidades por medio de un ensayo de laboratorio, el cual se utilizaron diferentes dosificaciones de fibra sintética como reemplazo del acero tradicional en el concreto, donde fueron expuestos a fuerzas como compresión y tensión reflejando así la resistencia, que posteriormente fue aplicada en las losas ubicadas dentro del campo y se cumplió con las especificaciones requeridas. Este procedimiento permitió recolectar información relevante para el área de obras civiles, específicamente en las losas de concreto que son sometidas a cargas por los equipos de perforación, Finalmente se realizó el respectivo análisis del procedimiento, en el cual se encontró que gracias al reemplazo de componentes tradicionales existe una mayor resistencia y optimización de costos que favorecen a la compañía. | spa |
dc.description.tableofcontents | TABLA DE CONTENIDO 1 INTRODUCCIÓN 8 2 CAPITULO I: PLANTEAMIENTO DEL PROBLEMA 10 2.1 DESCRIPCIÓN DEL PROBLEMA DE INVESTIGACIÓN 10 3 OBJETIVOS 11 3.1 OBJETIVO GENERAL 11 3.2 OBJETIVOS ESPECÍFICOS 11 4 JUSTIFICACIÓN 11 5 ALCANCE 13 6 CAPITULO II: REVISIÓN LITERARIA 15 6.1 ANTECEDENTES 15 6.2 MARCO TEÓRICO 16 6.2.1 Conceptos generales sobre el concreto 16 6.2.2 Componentes del concreto 16 6.2.3 Concreto Reforzado con Fibras Sintéticas 17 6.2.4 Tipo de fibra a utilizar: fibras sintéticas 18 6.2.5 Certificado de conformidad de la fibra sintética (SIKA) 19 6.2.6 Principales propiedades que mejora la fibra en el concreto. 19 7 CAPITULO III: METODOLOGÍA 23 7.1 ENFOQUE METODOLÓGICO 23 7.2 PARTICIPANTES 24 7.3 NORMATIVIDAD APLICABLE 24 7.4 PRESUPUESTO 26 7.5 PERSONAL REQUERIDO 26 7.6 EQUIPOS 27 7.7 REGISTRO FOTOGRÁFICO PLANTA CONCRETO 27 8 PROPIEDADES DEL CONCRETO ENDURECIDO 30 8.1 PROPIEDADES. 30 8.1.1 Elasticidad 30 8.1.2 Resistencia 30 8.1.3 Extensibilidad 31 8.2 ENSAYO DE CONCRETO ENDURECIDO 31 8.2.1 Ensayo de resistencia a la compresión 31 8.3 ENSAYO DE RESISTENCIA A LA FLEXIÓN 32 8.3.1 Información Importante acerca del ensayo 33 9 CAPITULO IV: RESULTADOS Y DISCUSIÓN 33 9.1 DISEÑO DE MEZCLA 33 9.2 GRANULOMETRÍA. 38 9.2.1 Granulometría agregado grueso 38 9.2.2 Granulometría agregado fino 38 9.2.3 Relación agua / cemento 39 9.3 REGISTRO FOTOGRÁFICO DEL SISTEMA CONSTRUCTIVO Y DE LA ELABORACIÓN DE LAS MUESTRAS. 39 9.4 REGISTRO FOTOGRÁFICO DE LOS ENSAYOS. 42 9.5 ENSAYOS A COMPRESIÓN CON DOSIFICACIÓN 2 KG DE FIBRA SIKAFIBER AD. 44 9.5.1 Resultados del ensayo testigos 45 9.6 ENSAYOS A COMPRESIÓN CON DOSIFICACIÓN 3 KG DE FIBRA SIKAFIBER AD 49 9.7 ENSAYOS A COMPRESIÓN CON DOSIFICACIÓN 4 KG DE FIBRA SIKAFIBER AD 53 10 ENSAYOS A FLEXIÓN CON DOSIFICACIÓN 2,3 Y 4 KG/M3 DE FIBRA SIKAFIBER AD 58 10.1 RESISTENCIA A LA COMPRESIÓN VS RESISTENCIA A LA FLEXIÓN PARA DOSIFICACIÓN DE 2 KM/M3 DE FIBRA SIKAFIBER AD 58 10.2 RESISTENCIA A LA COMPRESIÓN VS RESISTENCIA A LA FLEXIÓN PARA DOSIFICACIÓN DE 3 KM/M3 DE FIBRA SIKAFIBER AD 59 10.3 RESISTENCIA A LA COMPRESIÓN VS RESISTENCIA A LA FLEXIÓN PARA DOSIFICACIÓN DE 4 KM/M3 DE FIBRA SIKAFIBER AD 59 10.4 EVALUACIÓN ECONÓMICA 60 11 CONCLUSIONES 64 11.1 SUGERENCIAS PARA ESTUDIOS FUTUROS 65 12 REFERENCIAS 66 | spa |
dc.format.mimetype | application/pdf | spa |
dc.language.iso | spa | spa |
dc.rights | Derechos Reservados - Universidad Militar Nueva Granada, 2018 | spa |
dc.rights.uri | https://creativecommons.org/licenses/by-nc-nd/2.5/co/ | spa |
dc.title | Evaluación del reemplazo de acero tradicional por fibras como refuerzo en losas de concreto | spa |
dc.type | info:eu-repo/semantics/bachelorThesis | spa |
dc.rights.accessrights | info:eu-repo/semantics/openAccess | spa |
dc.subject.lemb | HORMIGON | spa |
dc.subject.lemb | ACERO | spa |
dc.subject.lemb | LOSAS DE HORMIGON | spa |
dc.publisher.department | Facultad de Estudios a Distancia | spa |
dc.type.local | Trabajo de grado | spa |
dc.description.abstractenglish | Currently, civil works are using a serie of techniques for loads application that have obtained great importance in the economy and the business environment for its demanding quality standards. This is a report resulting from the realization of the degree project to opt for the title of civil engineer. It was developed in order to optimize time and cost for the company Gran Tierra Energy Colombia, located in the Middle Magdalena Valley, in it , we explored its operation, strengths and weaknesses through a laboratory test, by using of different dosages of synthetic fiber as a replacement for traditional steel in concrete, where they were exposed to forces such as compression and tension, thus reflecting the resistance , which was subsequently applied to the slabs located within the field and the required specifications were met. This procedure allowed to collect relevant information to the civil works area, specifically in the concrete slabs that are subjected to loads by the drilling equipment. Finally, the respective analysis of the procedure was carried out, in which it was found that thanks to the replacement of components traditional there is greater resistance and cost optimization that could favor the company. | eng |
dc.title.translated | Evaluation of the traditional steel replacement by fibers as reinforcement in concrete slabs | spa |
dc.subject.keywords | Concrete | spa |
dc.subject.keywords | Synthetic fibers | spa |
dc.subject.keywords | Steel | spa |
dc.subject.keywords | Tension | spa |
dc.subject.keywords | Compression | spa |
dc.subject.keywords | Flexión | spa |
dc.publisher.program | Ingeniería Civil | spa |
dc.creator.degreename | Ingeniero Civil | spa |
dc.description.degreelevel | Pregrado | spa |
dc.publisher.faculty | Estudios a Distancia - Ingeniería Civil | spa |
dc.type.dcmi-type-vocabulary | Text | spa |
dc.type.version | info:eu-repo/semantics/acceptedVersion | spa |
dc.rights.creativecommons | Atribución-NoComercial-SinDerivadas | spa |
dc.relation.references | BATAI Z., MCINTYRE M. (2002). Application of Fibrillated Polypropylene Fibers for Restraint of Plastic Shrinkage Craking in Silica Fume Concrete, ACI Materials Journal. | spa |
dc.relation.references | GOPALARATNAM, V, SHAH, S.P. (1986) “Properties of steel fiber reinforced concrete subjected to impact load” ACI Materials Journal, January, February. pp.117-126. | spa |
dc.relation.references | HERMIDA, G. GARZÓN, O. LAMILLA, G. (2006). “Concreto de nuevo record de resistencia en Colombia”. Boletín del ACI #7 pp.4-9. | spa |
dc.relation.references | Marzon, F. Maccaferri, B, L. (2010). Reunión del concreto 2010. Aplicación de microfibras en concretos y morteros. | spa |
dc.relation.references | MINDESS, S. VONDRAN, G. (1988). “Properties of Concrete Reinforced with fibrillated polypropylene fibers under impact loading”. Cement and Concrete Research. V. 8, pp. 109-115. | spa |
dc.relation.references | TATNALL, P. (2002). “Shotcrete in Fires: Effects of fibers on explosive spalling”. Shotcrete ASA, Fall p10-12. | spa |
dc.relation.references | TROTTIER, J. MAHONEY, M. Forgeron, D. (2002). “¿pueden las fibras sintéticas reemplazar la malla electro soldada en losas sobre terreno?”. Concrete International, noviembre 2002. ACI- Seccional Colombiana. Boletín No. 11 2008 ACI Publicaciones Técnicas. | spa |
dc.relation.references | “Sika Informaciones técnicas – Concreto reforzado con fibras”. Recuperado de http://es.scribd.com/doc/63523105/SIKA-FIBRA. | spa |
dc.relation.references | Comportamiento de hormigones reforzados con y sin fibras de Cadima Marselo, Rosas Jorge, Aguirre Francisco. | spa |
dc.relation.references | Influencia de las fibras de polipropileno en las propiedades del concreto en estados plásticos y endurecidos, Mendoza Carlos, Aire Carlos y Dávila Paula. | spa |
dc.relation.references | Explorando el concreto reforzado con fibra INCOTEC. | spa |
dc.relation.references | Verificación de las dosificaciones de fibras sintéticas para neutralizar las fisuras causadas por contracción plástica en el concreto, Garcia Pedro. | spa |
dc.relation.references | Análisis del refuerzo residual en concreto para pavimentos rígidos con fibras metálicas y sintéticas, Mendoza Juan, Vaques Alberto, Villa Manuel. | spa |
dc.relation.references | Norma ASTM C 496 (2004) “Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens” EEUU. | spa |
dc.relation.references | Norma ASTM C 78. (2202). “Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)” EEUU. | spa |
dc.relation.references | Norma ASTM C 469. (2002). “Standard Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression” EEUU. | spa |
dc.relation.references | Frederick S. Merrit. (1999) “MANUAL DEL INGENIERO CIVIL” TOMO I, México. | spa |
dc.relation.references | Adam M. Neville. (1999) “TECNOLOGÍA DEL CONCRETO” México. | spa |
dc.subject.proposal | Concretos | spa |
dc.subject.proposal | Fibras sintéticas | spa |
dc.subject.proposal | Acero | spa |
dc.subject.proposal | Tensión | spa |
dc.subject.proposal | Compresión | spa |
dc.subject.proposal | Flexión | spa |
dc.publisher.grantor | Universidad Militar Nueva Granada | spa |
Archivos en el ítem
Este ítem aparece en la(s) siguiente(s) colección(ones)
-
Ingeniería Civil [356]