Show simple item record

dc.contributor.advisorCastro, Juan Carlos
dc.contributor.authorVillamil Sacristan, Damian Andres
dc.contributor.authorCastro Ardila, Juan Sebastián
dc.date.accessioned2020-11-13T03:54:47Z
dc.date.available2020-11-13T03:54:47Z
dc.date.issued2020-10-05
dc.identifier.urihttp://hdl.handle.net/10654/36907
dc.description.abstractEn la actualidad la industria petrolera es una de las de mayor crecimiento a nivel mundial, en Colombia aproximadamente se producen 900.000 barriles de crudo por día (bdp). Esta práctica genera enormes cantidades de residuos producto de las perforaciones debido a los altos volúmenes de material que se utilizan a la hora de la refrigeración de la maquinaria y en la extracción del crudo; los recortes de perforación los cuales se generan por una mezcla entre el suelo extraído y los hidrocarburos son materiales de tipo peligroso por lo que se deben disponer de una forma diferente. En general, los residuos de perforación que no son peligrosos se denominan hoy en día “residuos no peligrosos” de yacimientos petrolíferos. No obstante, algunos productos químicos utilizados en los fluidos de perforación pueden ser peligrosos, como los son la soda cáustica, el diésel, los bactericidas, algunos materiales catiónicos, aceites y alcoholes. (PEÑA, 2018) La presente tesis describe el proceso que se debe llevar a cabo para realizar la caracterización de un material producto de la extracción de petróleo, describiendo las normas de ensayo de materiales 2013 haciendo referencia a los ensayos dispuestos a las propiedades físicas y mecánicas de los suelos. Se describen y analizan los métodos de tratamiento que se utilizan a nivel internacional para el manejo de los lodos procedentes de la perforación petrolera, además de evaluar la aplicabilidad de estas técnicas a nivel nacional.spa
dc.description.tableofcontentsLista de ilustraciones 8 Lista de tablas 9 GLOSARIO 10 RESUMEN 12 INTRODUCCIÓN 13 1. PROBLEMA 15 1.1. IDENTIFICACIÓN 15 1.2. DESCRIPCIÓN 15 1.3. PLANTEAMIENTO 16 2. DELIMITACION 17 2.1. CONCEPTUAL 17 3. OBJETIVO 17 3.1. OBJETIVO GENERAL 17 3.2. OBJETIVOS ESPECÍFICOS 17 4. ANTECEDENTES 18 4.1. INTERNOS 18 4.2. EXTERNOS 19 5. JUSTIFICACION 20 6. ESTADO DEL ARTE 20 7. MARCO REFERENCIAL 22 7.1. MARCO TEÓRICO 22 7.1.1. Diseño de Perforación 22 7.1.2. Etapas de la perforación 23 7.1.3. Equipos de Perforación 23 7.1.4. Clasificación de Fluidos de Perforación 25 7.1.5. Funciones del Fluido de Perforación 26 7.1.6. Recortes de Perforación 27 7.1.7. Métodos de Tratamiento de los Recortes de Perforación 31 7.1.8. Pretratamiento 31 7.1.9. Tratamientos térmicos 32 7.1.10. Tratamientos biológicos 35 7.1.11. Tratamientos físicos 39 7.1.12. Tratamientos químicos 41 7.1.13. Otros Tratamientos 43 7.2. MARCO LEGAL 44 7.2.1. Normativa nacional relacionada con recortes de perforación 44 6.3. MARCO AMBIENTAL 46 6.3.1. Composición 47 7. METODOLOGIA 47 8. ENSAYOS 48 8.1. Humedad Natural (I.N.V.E – 122 – 13) 48 8.2. Determinación del límite líquido (I.N.V.E – 125 – 13) 49 8.3. Determinación limite plástico e índice de plasticidad (I.N.V.E – 126 – 13) 50 8.4. Análisis granulométrico (I.N.V.E – 123 – 13) 51 8.5. Permeabilidad (I.N.V.E – 130 – 13) 53 8.6. Descripción e Identificación de Suelos (Procedimiento Visual y manual) (I.N.V.E – 102 – 13) 55 8.7. Determinación de la Gravedad Específica de las Partículas Sólidas de los Suelos y del Llenante Mineral, Empleando un Picnómetro con Agua. (I.N.V. E – 128 – 13) 56 8.8. Consolidación Unidimensional de Suelos (I.N.V. E – 151 – 13) 58 8.9. Corte Directo en Condición Consolidada Drenada (I.N.V. E – 154 – 13) 60 8.10. Sistema de clasificación de los suelos SUCS 61 9. DISCUSION 62 9.1. GENERALIDADES DE LOS MÉTODOS DE TRATAMIENTO 63 9.2. TRATAMIENTOS TÉRMICOS 63 9.3. TRATAMIENTOS BIOLÓGICOS 64 9.4. TRATAMIENTOS FÍSICO-QUÍMICOS 64 9.5. DISPOSICIÓN FINAL 65 9.6. USOS Y APLICACIONES 65 10. CONCLUSIONES 66 11. RECOMENDACIONES 67 12. BIBLIOGRAFIA 68spa
dc.format.mimetypeapplicaction/pdfspa
dc.language.isospaspa
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/*
dc.titleCaracterización de los recortes de perforación de pozos petroleros para el análisis de su tratamiento y sus posibles aplicacionesspa
dc.rights.accessrightsinfo:eu-repo/semantics/openAccessspa
dc.subject.lembPOZOS PETROLEROSspa
dc.subject.lembHIDROCARBUROSspa
dc.subject.lemblixspa
dc.type.localTesis/Trabajo de grado - Monografía - Pregradospa
dc.description.abstractenglishCurrently, the oil industry is one of the fastest growing in the world, in Colombia approximately 900,000 barrels of crude oil are produced per day (bdp). This practice generates enormous amounts of waste product of the perforations due to the high volumes of material that are used at the time of the refrigeration of the machinery and in the extraction of the crude oil; Drilling cuttings which are generated by a mixture between the extracted soil and the hydrocarbons are hazardous materials so they must be disposed of in a different way. In general, drilling wastes that are not hazardous are referred to today as “non-hazardous waste” from oil fields. However, some chemicals used in drilling fluids can be dangerous, such as caustic soda, diesel, bactericides, some cationic materials, oils, and alcohols. (PEÑA, 2018) This thesis describes the process that must be carried out to carry out the characterization of a material product of oil extraction, describing the 2013 materials testing standards referring to the tests provided for the physical and mechanical properties of soils. Treatment methods used internationally for the management of oil drilling muds are described and analyzed, in addition to evaluating the applicability of these techniques at the national level.spa
dc.title.translatedCharacterization of oil well drilling cuttings for the analysis of their treatment and their possible applicationsspa
dc.subject.keywordsSOLVENTspa
dc.subject.keywordsLUBRICANTSspa
dc.subject.keywordsLEACHEDspa
dc.subject.keywordsPLASTICITY INDEXspa
dc.subject.keywordsHYDROCARBONSspa
dc.subject.keywordsSPECIFIC GRAVITYspa
dc.subject.keywordsPOLLUTANTspa
dc.subject.keywordsCOMPOSITIONspa
dc.publisher.programIngeniería Civilspa
dc.creator.degreenameIngeniero Civilspa
dc.description.degreelevelPregradospa
dc.publisher.facultyFacultad de Ingenieríaspa
dc.type.driverinfo:eu-repo/semantics/bachelorThesisspa
dc.rights.creativecommonsAttribution-NonCommercial-NoDerivatives 4.0 Internationalspa
dc.relation.referencesANGIE SUGGEY GÓMEZ VILLARREAL, J. X. (2018). METODOLOGÍA PARA LA UTILIZACIÓN DE RECORTES DE PERFORACIÓN BASE AGUA Y SU POSIBLE USO INDUSTRIAL EN COLOMBIA. ANÁLISIS DE CICLO DE VIDA Y FACTIBILIDAD ECONÓMICA. Bucaramanga: Universidad Industrial de Santander.spa
dc.relation.referencesArévalo Peña, J. J. (2018). Valoración de alternativas de tratamiento de fluidos de perforación en la industria petrolera. Bogota D.C: Universidad Militar Nueva Granada.spa
dc.relation.referencesONILLA, M. L. (2013). RECUPERACIÓN DE LOS HIDROCARBUROS PRESENTES EN LOS RESIDUOS Y PASIVOS AMBIENTALES GENERADOS POR LAS ACTIVIDADES PROPIAS DE LA INDUSTRIA PETROLERA POR MEDIO DE DESORCIÓN TÉRMICA. BUCARAMANGA: UNIVERSIDAD INDUSTRIAL DE SANTANDER.spa
dc.relation.referencesCYNDY ARGOTE SIERRA, J. A. (2011). COMPARACIÓN TÉCNICA DEL MÉTODO ENDRILL CON LOS MÉTODOS CONVENCIONALES DE TRATAMIENTO DE CORTES DE PERFORACIÓN. Bucaramanga: UNIVERSIDAD INDUSTRIAL DE SANTANDER.spa
dc.relation.referencesFrancisca, F. (2010). Comportamiento de limos loessicos contaminados con hidrocarburos estabilizados y solidificados con cemento portland. Cordoba: boletín geológico y minero.spa
dc.subject.proposalCOMPOSICIONspa
dc.subject.proposalCONTAMINANTEspa
dc.subject.proposalGRAVEDAD ESPECÍFICAspa
dc.subject.proposalHIDROCARBUROSspa
dc.subject.proposalINDICE DE PLASTICIDADspa
dc.subject.proposalLIXIVIADOSspa
dc.subject.proposalLUBRICANTESspa
dc.subject.proposalSOLVENTEspa
dc.description.abstractotherDerzeit ist die Ölindustrie eine der am schnellsten wachsenden der Welt. In Kolumbien werden täglich rund 900.000 Barrel Rohöl (bdp) produziert. Diese Praxis erzeugt enorme Mengen an Abfallprodukten der Perforationen aufgrund der hohen Materialmengen, die zum Zeitpunkt der Kühlung der Maschinen und bei der Gewinnung des Rohöls verwendet werden; Bohrspäne, die durch eine Mischung zwischen dem extrahierten Boden und den Kohlenwasserstoffen entstehen, sind gefährliche Stoffe und müssen daher auf andere Weise entsorgt werden. Im Allgemeinen werden Bohrabfälle, die nicht gefährlich sind, heute als „nicht gefährliche Abfälle“ aus Ölfeldern bezeichnet. Einige in Bohrflüssigkeiten verwendete Chemikalien können jedoch gefährlich sein, wie Ätznatron, Diesel, Bakterizide, einige kationische Materialien, Öle und Alkohole. (PEÑA, 2018) Diese Arbeit beschreibt den Prozess, der durchgeführt werden muss, um die Charakterisierung eines Materialprodukts der Ölförderung durchzuführen, und beschreibt die Materialprüfnormen von 2013, die sich auf die Prüfungen beziehen, die für die physikalischen und mechanischen Eigenschaften von Böden vorgesehen sind. International angewandte Behandlungsmethoden für die Bewirtschaftung von Ölbohrschlämmen werden beschrieben und analysiert sowie die Anwendbarkeit dieser Techniken auf nationaler Ebene bewertet.spa
dc.publisher.grantorUniversidad Militar Nueva Granadaspa
dc.type.coarhttp://purl.org/coar/resource_type/c_7a1f*
dc.type.hasversioninfo:eu-repo/semantics/acceptedVersionspa
dc.identifier.instnameinstname:Universidad Militar Nueva Granadaspa
dc.identifier.reponamereponame:Repositorio Institucional Universidad Militar Nueva Granadaspa
dc.identifier.repourlrepourl:https://repository.unimilitar.edu.cospa
dc.rights.localAcceso abiertospa
dc.coverage.sedeCalle 100spa
dc.rights.coarhttp://purl.org/coar/access_right/c_abf2


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

http://creativecommons.org/licenses/by-nc-nd/4.0/
Except where otherwise noted, this item's license is described as http://creativecommons.org/licenses/by-nc-nd/4.0/