Mostrar el registro sencillo del ítem

dc.contributor.advisorGaviria Mendoza, Carlos Andres
dc.contributor.authorSierra Castellanos, Dierid Yeir
dc.contributor.authorPaez Duque, Diana Victoria
dc.date.accessioned2020-11-14T04:02:32Z
dc.date.available2020-11-14T04:02:32Z
dc.date.issued2020-10-19
dc.identifier.urihttp://hdl.handle.net/10654/36948
dc.description.abstractEste documento parte de la necesidad de aprender sobre los aisladores sísmicos, que se han venido utilizando en diferentes estructuras a nivel mundial y con resultados increíbles, que ayudan al ingeniero a cumplir en su deber de mejora en la calidad de vida de la comunidad disminuyendo riesgos frente a un sismo y al mismo en la reducción de costos por mantenimiento. Para la elaboración de este estudio se realizó la revisión ordenada de variedad de artículos entre tesis, estudios y patentes; en su mayoría en idioma español donde se analizan diferentes aspectos que intervienen en la utilización de aisladores. Esta literatura se recopiló de fuentes confiables como las diferentes bases de bibliotecas y google académico. La información contenida fue extraída de la lectura exhaustiva de los diferentes documentos donde se buscó información precisa y puntual, una vez realizada la lectura procedemos a realizar los resúmenes con la información más importante de cada uno de los artículos, además de la información escrita se acompaña de imágenes que brindan claridad a algunos conceptos complejos acerca de la temática de estudio. El comportamiento estructural de un edificio requiere una evaluación después de movimientos sísmicos severos. Por esta razón, se han desarrollado tecnologías de aislamiento sísmico y disipación de energía. Estas tecnologías han demostrado ser adecuadas para estructuras y su comportamiento es efectivo. Se utiliza para diseñar nuevas estructuras, mejorar y reparar estructuras existentes.spa
dc.format.mimetypeapplicaction/pdfspa
dc.language.isospaspa
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/*
dc.titleAisladores sísmicos de base: un compendio de alternativasspa
dc.rights.accessrightsinfo:eu-repo/semantics/openAccessspa
dc.subject.lembINGENIERIA CIVILspa
dc.subject.lembDISEÑO SISMO RESISTENTEspa
dc.subject.lembINGENIERIA SISMICAspa
dc.type.localTesis/Trabajo de grado - Monografía - Pregradospa
dc.description.abstractenglishThis document starts from the need to learn about seismic isolators, which have been used in different structures worldwide and with incredible results, which help the engineer to fulfill his duty to improve the quality of life of the community, reducing risks. in the face of an earthquake and in reducing maintenance costs. For the preparation of this study, an orderly review of variety of articles was carried out, including theses, studies and patents; mostly in Spanish language where different aspects involved in the use of insulators are analyzed. This literature was compiled from reliable sources such as the different library bases and academic google. The information contained were extracted from the exhaustive reading of the different documents where precise and punctual information, once the reading is done we proceed to make summaries with the most important information of each of the articles, in addition to the written information it is accompanied of images that provide clarity to complex concepts about the subject area were added. The structural behavior of building requires an evaluation after severe earthquakes. For this reason, seismic isolation and energy dissipation technologies have been developed. These technologies have proven to be suitable for structures and their behavior is effective. It is used to design new structures, improve and repair existing structures.spa
dc.title.translatedBase seismic isolators: a compendium of alternativesspa
dc.subject.keywordsSeismic isolatorsspa
dc.subject.keywordsDamagespa
dc.subject.keywordsStructural behaviorspa
dc.publisher.programIngeniería Civilspa
dc.creator.degreenameIngeniero Civilspa
dc.description.degreelevelPregradospa
dc.publisher.facultyFacultad de Estudios a Distanciaspa
dc.type.driverinfo:eu-repo/semantics/bachelorThesisspa
dc.rights.creativecommonsAttribution-NonCommercial-NoDerivatives 4.0 Internationalspa
dc.relation.referencesMokha, A. S., Constantinou, M. C., & Reinhorn, A. M. (1990). Experimental study and analytical prediction of earthquake response of a sliding isolation system with a spherical surface.spa
dc.relation.referencesZayas, V. A., Low, S. S., & Mahin, S. A. (1990). A simple pendulum technique for achieving seismic isolation. Earthquake spectra, 6(2), 317-333.spa
dc.relation.referencesNew Zealand Ministry of Works and Development. (1983). Design of Lead‐Rubber Bridge Bearings.spa
dc.relation.referencesKelly, J. M., & Beucke, K. E. (1983). A friction damped base isolation system with fail‐safe characteristics. Earthquake Engineering & Structural Dynamics, 11(1), 33-56.spa
dc.relation.referencesVaradarajan, N., & Nagarajaiah, S. (2004). Wind response control of building with variable stiffness tuned mass damper using empirical mode decomposition/Hilbert transform. Journal of engineering mechanics, 130(4), 451-458.spa
dc.relation.referencesChan, R. W., Lin, Y. S., & Tagawa, H. (2019). A smart mechatronic base isolation system using earthquake early warning. Soil Dynamics and Earthquake Engineering, 119, 299-307.spa
dc.relation.referencesGenatios, C., & Lafuente, M. (2016). Introducción al uso de aisladores y disipadores en estructuras.spa
dc.relation.referencesGerbaudo, C. F. (2006). Diseño de un disipador metálico para una conexión articulado de viga y columna (Doctoral dissertation, Tesis de Maestría, Facultad de Ciencias Exactas, Físicas y Naturales, Universidad Nacional de Córdoba, Argentina).spa
dc.relation.referencesSpencer Jr, B. F., & Soong, T. T. (1999, August). New applications and development of active, semi-active and hybrid control techniques for seismic and non-seismic vibration in the USA. In Proceedings of international post-SMiRT conference seminar on seismic isolation, passive energy dissipation and active control of vibration of structures (pp. 23-25). Cheju, Korea.spa
dc.relation.referencesJaramillo-Fernández, J. D. & Gélvez-Gélvez, G. (Marzo, 2020). Inventan aislador sísmico. Medellín, Colombia: Universidad EAFIT. http://www.eafit.edu.co/investigacion/revistacientifica/edicion-170/Paginas/aislador-sismico-conocimiento-sector-electrico.aspxspa
dc.relation.referencesIlieva Anguelova, I. (2020). Estudio comparado de los métodos y dispositivos actuales orientados a amortiguar los efectos del terremoto sobre la estructura de los edificios (Doctoral dissertation).spa
dc.relation.referencesEspinel Jaramillo, G. R., & Herrera Flores, P. A. (2013). Diseño sísmico con sistema de amortiguamiento en edificios regulares de hormigón armado y comparación mediante ejemplos (Bachelor's thesis, Pontificia Universidad Católica del Ecuador).spa
dc.relation.referencesBoard, M. R. (2015). MRB. Archive: Natural Rubber Statistics, 2015.spa
dc.relation.referencesInternational Rubber Study Group. (2015). Latest World Rubber Industry Outlook now available from IRSG.spa
dc.relation.referencesSienkiewicz, M., Kucinska-Lipka, J., Janik, H., & Balas, A. (2012). Progress in used tyres management in the European Union: A review. Waste management, 32(10), 1742-1751.spa
dc.relation.referencesAbraham, E., Cherian, B. M., Elbi, P. A., Pothen, L. A., & Thomas, S. (2011). Recent advances in the recycling of rubber waste. Recent developments in polymer recycling, 47, 100.spa
dc.relation.referencesAdhikari, B., De, D., & Maiti, S. (2000). Reclamation and recycling of waste rubber. Progress in polymer science, 25(7), 909-948.spa
dc.relation.referencesMeddah, A., Beddar, M., & Bali, A. (2014). Use of shredded rubber tire aggregates for roller compacted concrete pavement. Journal of Cleaner Production, 72, 187-192.spa
dc.relation.referencesKang, B. S., Kang, G. J., & Moon, B. Y. (2003). Hole and lead plug effect on fiber reinforced elastomeric isolator for seismic isolation. Journal of materials processing technology, 140(1-3), 592-597.spa
dc.relation.referencesBuckle, I. G. (2000). Passive control of structures for seismic loads. Bulletin of the New Zealand Society for Earthquake Engineering, 33(3), 209-221.spa
dc.relation.referencesMoon, B. Y., Kang, G. J., Kang, B. S., Kim, G. S., & Kelly, J. M. (2003). Mechanical properties of seismic isolation system with fiber-reinforced bearing of strip type. International applied mechanics, 39(10), 1231-1239.spa
dc.relation.referencesAshkezari, G. D., Aghakouchak, A. A., & Kokabi, M. (2008). Design, manufacturing and evaluation of the performance of steel like fiber reinforced elastomeric seismic isolators. Journal of materials processing technology, 197(1-3), 140-150.spa
dc.relation.referencesNaeim, F., & Kelly, J. M. (1999). Design of seismic isolated structures: from theory to practice. John Wiley & Sons.spa
dc.relation.referencesCouncil, B. B. S. S. (2003). National Institute of Building Sciences. NEHRP recommended provisions for seismic regulations for new buildings-Provisions and commentary.spa
dc.relation.referencesKang, B. S., Kang, G. J., & Moon, B. Y. (2003). Hole and lead plug effect on fiber reinforced elastomeric isolator for seismic isolation. Journal of materials processing technology, 140(1-3), 592-597.spa
dc.relation.referencesToopchi-Nezhad, H., Tait, M. J., & Drysdale, R. G. (2011). Bonded versus unbonded strip fiber reinforced elastomeric isolators: finite element analysis. Composite Structures, 93(2), 850-859.spa
dc.relation.referencesVan Engelen, N. C., Osgooei, P. M., Tait, M. J., & Konstantinidis, D. (2015). Partially bonded fiber‐reinforced elastomeric isolators (PB‐FREIs). Structural Control and Health Monitoring, 22(3), 417-432.spa
dc.relation.referencesGent, A. N. (2012). Engineering with rubber: how to design rubber components. Carl Hanser Verlag GmbH Co KG.spa
dc.relation.referencesNaeim, F., & Kelly, J. M. (1999). Design of seismic isolated structures: from theory to practice. John Wiley & Sons.spa
dc.relation.referencesSuárez, N. B., López, F. A. G., & Guerrero, L. A. R. (2014). Experiencias sobre aislamiento sísmico en Colombia. In Resúmenes de comunicaciones (pp. 317-318). Asociación Científico-técnica del Hormigón Estructural.spa
dc.relation.referencesApoyos elastoméricos y POT. (s. f.). Verdú - The global rubber technical service. Recuperado 21 de junio de 2020, de http://www.cauchoverdu.com/pag/es/5/apoyos-elastomericos-y-potspa
dc.relation.referencesBetancour, N., & Galvis, F. (2015). Aislamiento sísmico en Colombia: Caso de estudio Puentes Cra. 44, Cali. Congreso Nacional de Ingeniería Sísmica, VII, 1-11. https://www.researchgate.net/profile/Francisco_Galvis/publication/317600771_Aislamiento_sismico_en_Colombia_caso_de_estudio_puentes_cra_44-Auto_Sur_Cali/links/59429900a6fdccb93ab261bd/Aislamiento-sismico-en-Colombia-caso-de-estudio-puentes-cra-44-Auto-Sur-Cali.pdfspa
dc.relation.referencesIng Dario Farias Garcia. (s. f.). Código Colombiano de Diseño de Puentes. En Asociacion Colombiana de Ingenieria Sismuca - AIS (Ed.), Código Colombiano de Diseño de Puentes (pp. 1-15-9.6). https://www.invias.gov.co/index.php/archivo-y-documentos/documentos-tecnicos/3709-norma-colombiana-de-diseno-de-puentes-ccp14spa
dc.relation.referencesAASHTO. 2014. AASHTO LRFD Bridge Design Specification, 6 th Edition, American Association of State and Transportation Officials, Washington D.C.spa
dc.relation.referencesAASHTO. 2010. Guide Specifications for Seismic Isolation Design, 3 th Edition, American Association of State and Transportation Officials, Washington D.C.spa
dc.relation.referencesDetek Internacional, S.A. de C.V. (s. f.). Detek Internacional, S.A. de C.V. Recuperado 21 de junio de 2020, de https://www.detek.com.mx/automotriz/construccion/aisladores-s%C3%ADsmicosspa
dc.relation.referencesCymper.com. (s. f.). Cymper.com. Recuperado 21 de junio de 2020, de https://www.cymper.com/blog/apoyos-elastomericos-cosas-que-debes-saber/spa
dc.relation.referencesAguiar, R., Morales, E., Guaygua, B., & Rodríguez, M. (2017). Simplified method for seismic analysis of structures with FPS isolators-third generation. Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, 33(1).spa
dc.relation.referencesSosa, A., & Ruiz, S. (1992). ANÁLISIS ESTRUCTURAL Y COSTOS DE EDIFICIOS CON AISLADORES SÍSMICOS. Revista de Ingeniería Sísmica, (44), 11-28.spa
dc.relation.referencesPittí, R. B., & Rogelio, B. (2013). Estado del arte de los sistemas de protección sísmica para edificios. Mente & Materia, 4(1), 26-27.spa
dc.relation.referencesKelly, J. M., & Konstantinidis, D. (2011). Mechanics of rubber bearings for seismic and vibration isolation. John Wiley & Sons.spa
dc.relation.referencesIsmail, M., Rodellar, J., & Ikhouane, F. (2008). Method for the seismic isolation of a supported object. Patents No. WO2010000897A1, ES20080002043, P200802043. PCT/ES2009/000351, Spanish Office of Patents and Marks.spa
dc.subject.proposalAisladores sísmicosspa
dc.subject.proposalDañospa
dc.subject.proposalComportamiento estructuralspa
dc.description.abstractotherCe document part de la nécessité de se renseigner sur les isolateurs sismiques, qui ont été utilisés dans différentes structures à travers le monde et avec des résultats incroyables, qui aident l'ingénieur à remplir son devoir d'améliorer la qualité de vie de la communauté, en réduisant les risques. face à un tremblement de terre et à la réduction des coûts de maintenance. Pour la préparation de cette étude, une revue ordonnée de divers articles a été effectuée, y compris des thèses, des études et des brevets; principalement en langue espagnole où différents aspects impliqués dans l'utilisation des isolants sont analysés. Cette littérature a été compilée à partir de sources fiables telles que les différentes bases de bibliothèques et google académique. Les informations contenues ont été extraites de la lecture exhaustive des différents documents où des informations précises et ponctuelles ont été recherchées, une fois la lecture terminée nous procédons à des synthèses avec les informations les plus importantes de chacun des articles, en plus des informations écrites qui l'accompagnent d'images qui clarifient certains concepts complexes du sujet d'étude. Le comportement structurel d'un bâtiment nécessite une évaluation après de graves tremblements de terre. Pour cette raison, des technologies d'isolation sismique et de dissipation d'énergie ont été développées. Ces technologies se sont avérées adaptées aux structures et leur comportement est efficace. Il est utilisé pour concevoir de nouvelles structures, améliorer et réparer les structures existantes.spa
dc.publisher.grantorUniversidad Militar Nueva Granadaspa
dc.type.coarhttp://purl.org/coar/resource_type/c_7a1f*
dc.type.hasversioninfo:eu-repo/semantics/acceptedVersionspa
dc.identifier.instnameinstname:Universidad Militar Nueva Granadaspa
dc.identifier.reponamereponame:Repositorio Institucional Universidad Militar Nueva Granadaspa
dc.identifier.repourlrepourl:https://repository.unimilitar.edu.cospa
dc.rights.localAcceso abiertospa
dc.coverage.sedeCampus UMNGspa
dc.rights.coarhttp://purl.org/coar/access_right/c_abf2


Archivos en el ítem

Thumbnail

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem

http://creativecommons.org/licenses/by-nc-nd/4.0/
Excepto si se señala otra cosa, la licencia del ítem se describe como http://creativecommons.org/licenses/by-nc-nd/4.0/