Diseño y simulación del control para un mecanismo planar implementado en terapias de tobillo para niños de 3 a 7 años que presenten parálisis cerebral.
Design and simulation of control for a planar mechanism implemented in ankle therapies for children 3-7 years who have cerebral palsy
Citación
Date
2017-10-02Author
Castañeda Jimenéz, Claudia Lorena
Obtained degree
Ingeniero en Mecatrónica
Ingeniero en Mecatrónica
Key words
; tobillos - rehabilitacion; paralisis cerebral
Metadata
Show full item record
Documents PDF
Abstract
Este trabajo de grado está enmarcado en el control de un mecanismo de cuatro barras, utilizado para rehabilitación de tobillo de niños que presentan parálisis cerebral; se emula el movimiento realizado del pie en el ciclo de marcha.
Para ello se realizó el modelo cinemático y dinámico del mecanismo que permite imitar dicho movimiento, a partir de esto se determinó y diseñó estrategias de control , demostrando el seguimiento de la trayectoria deseada. Esta, se obtuvo mediante el análisis de la cinemática del miembro inferior utilizando un modelo de péndulo doble, donde dicha trayectoria depende de los ángulos realizados por la cadera y la rodilla, los cuales se determinaron gracias a un software
de simulación de la marcha humana.
Para tal efecto, se diseñó el control que siguiera dicha trayectoria por servo sistema y modos deslizantes, obteniendo como resultado que el control por modos deslizantes cumplía con el seguimiento de la trayectoria deseada.
This work of degree is framed in the control of a mechanism of four bars used for the rehabilitation of ankle of children with cerebral palsy, which emulates the movement of the foot in the walking cycle.To do this, the kinematic and dynamic model of the mechanism is performed, the quality allows an analysis, a veri cation of the achievement to determine and design the most appropriate control strategy which allows it to track the desired trayThe desired trajectory was determined by means of the analysis of the lower limb, for this a double pendulum model is used in which said trajectory depends on the angles made by the hip and the knee. These angles were determined by a software of human gait simulation.The control that followed the tray was then performed, for this purpose it was designed and controlled by the servo system and the sliding modi ers, where it was obtained as a result that the control by the compression sliders with the tracking of the desired tray
Collections
- Ingeniería Mecatrónica [216]